Speaker / Precision Transducers / Loudspeaker

COLOSSUS 18XLS

COLOSSUS 18XLS

Be the first to review this product

Rs0.00

In stock

SKU: Fane-COLOSSUS-18XLS

BEST FOR BASS REFLEX ENCLOSURES

Product Features:



  • • 250mm Diameter Magnet structure.

  • • Low interference flux path.

  • • Fibre loaded UK manufactured cone.

  • • 64 mm peak to peak maximum linear excursion.

  • • 24.5 Tm BL.

  • • Fast, accurate and controlled bass at high levels of excursion.



Details

The Prime 18XS is intended for use as a high-output bass driver in multi way systems and features a 4 inch ‘sandwich’ (inside and outside windings) voice coil, immersed in a symmetric magnetic field yielding increased linearity and lower distortion. This, coupled with laminated silicone suspensions, a large Xmax of 12mm with peak to peak travel of 60mm, ensures fast accurate bass at high levels of excursion. The cone membrane, manufactured from polycellulose, is much stronger and more durable than conventional paper pulp alternatives. This allows the driver to combine high-sensitivity with the structural integrity required to produce undistorted low frequencies at extreme sound pressure levels. The driver handles 1200 Watts (A.E.S.) continuous and can cope with peaks in excess of 4800 Watts. This is due to advanced thermal management in the form of vented die-cast chassis and increased motor system venting. These measures effectively remove heat from the voice coil, resulting in extremely low-power compression. The Prime 18XS exhibits 100 dB sensitivity and can deliver bass down to 29 Hz (-6 dB) in a 200 litre ported enclosure
18” / 457.2 mm
CHASSIS DIAMETER
1200 w (A.E.S.)
POWER HANDLING
100 dB
SENSITIVITY (1w / 1m)
35 Hz - 500 Hz
FREQUENCY RESPONSE
4.0” / 101.6 mm
COPPER - INSIDE / OUTSIDE
WINDINGS VOICE COIL
12 mm Xmax

Product Features:

  • • 250mm Diameter Magnet structure.
  • • Low interference flux path.
  • • Fibre loaded UK manufactured cone.
  • • 64 mm peak to peak maximum linear excursion.
  • • 24.5 Tm BL.
  • • Fast, accurate and controlled bass at high levels of excursion.
   
  ELECTRO ACOUSTIC SPECIFICATIONS     THIELE SMALL PARAMETERS
Nominal Chassis Diameter 18” / 457.2 mm   FS Hz 36 Hz
Impedance 8 Ω   RE Ohms 5.2 O
Power Handling 1200 w (A.E.S.)   Qms 13.610
Peak Power (6dB Crest Factor) 4800 w (A.E.S.)   Qes 0.420
Usable Frequency Range -6dB 28 Hz - 500 Hz   Qts0.400
Sensitivity (1 w - 1 m) 97 dB   Vas Ltr 1.56 litres
Vd litres 1.56 litres   CMS (mm/N) 0.09 mm/N
Minimum Impedance Zmin 7.44 Ω   BL T/m 24.5 T/m
Effective Piston Diameter 15.43” / 391.92 mm   Mms (grms) 209 grams
Peak Displacement Volume of Cone Vd 1.56 litres   Xmax (mm) 12.5 mm
Magnet Weight 4.7 Kg   Sd (cm2) 1210 cm2
Magnetic Gap Depth 0.47” / 12.00 mm   Efficiency % 2.0 %
Flux Density 1.1 Tesla   Le (1k Hz) 1.5 mH
Coil Winding Height 1.18” / 30.00 mm  
Voice Coil Diameter 4.0” / 101.6 mm  
   
  MOUNTING / SHIPPING INFORMATION     MATERIALS OF CONSTRUCTION
Overall Diameter 19.1” / 485.14 mm   Former Material Resin Bonded Glass Fibre
Width Across Flats 18” / 457.2 mm   Voice CoilCopper - Inside / Outside Windings
Flange Height 0.465” / 11.8 mm   Magnet MaterialFerrite
Baffle Hole Diameter F/M 16.53” / 419.86 mm   Chassis Die-cast Aluminium
Baffle Hole Diameter R/M 16.33” / 414.78 mm   ConeStraight Polycellulose Ribbed Cone
Gasket Supplied Front & Rear   Surround / Edge Termination Multi Roll Polyvinyl Damped Fabric
Fixing Holes 8x 7 mm on 468 mm PCD
8x 7 mm on 438.15 mm PCD
  Dust Dome Paper
Depth 8.66” / 220.00 mm   Connectors Push-button Spring Terminals
Weight 36.95 lb / 16.76 kg   Polarity Positive voltage at red terminal
causes forward motion of cone
Recommended Enclosure Volume 125 - 210 litres  
Shipping Weight 39.80 lb / 18.05 kg  
Packing Carton Dimensions 520 x 520 x 250 mm  
   

  • • Please enquire about alternative impedances.
  • • A.E.S. power handling test. Pink noise band-pass filtered at 12 dB per octave with cutoff frequencies of 30 Hz and 300 Hz. Driver mounted in free air, test signal applied at rated power for two hours.
  • • Please note that the frequency response measurements are supplied for comparison only and are not a measure of the low frequency performance which may be achieved in a fully optimized system.

Additional Information

Brands FANE

Product Tags

  • No tags connected to product

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

WRITE YOUR REVIEW

Write Your Own Review

You're reviewing: COLOSSUS 18XLS

Description

Details

The Prime 18XS is intended for use as a high-output bass driver in multi way systems and features a 4 inch ‘sandwich’ (inside and outside windings) voice coil, immersed in a symmetric magnetic field yielding increased linearity and lower distortion. This, coupled with laminated silicone suspensions, a large Xmax of 12mm with peak to peak travel of 60mm, ensures fast accurate bass at high levels of excursion. The cone membrane, manufactured from polycellulose, is much stronger and more durable than conventional paper pulp alternatives. This allows the driver to combine high-sensitivity with the structural integrity required to produce undistorted low frequencies at extreme sound pressure levels. The driver handles 1200 Watts (A.E.S.) continuous and can cope with peaks in excess of 4800 Watts. This is due to advanced thermal management in the form of vented die-cast chassis and increased motor system venting. These measures effectively remove heat from the voice coil, resulting in extremely low-power compression. The Prime 18XS exhibits 100 dB sensitivity and can deliver bass down to 29 Hz (-6 dB) in a 200 litre ported enclosure
18” / 457.2 mm
CHASSIS DIAMETER
1200 w (A.E.S.)
POWER HANDLING
100 dB
SENSITIVITY (1w / 1m)
35 Hz - 500 Hz
FREQUENCY RESPONSE
4.0” / 101.6 mm
COPPER - INSIDE / OUTSIDE
WINDINGS VOICE COIL
12 mm Xmax

Product Features:

  • • 250mm Diameter Magnet structure.
  • • Low interference flux path.
  • • Fibre loaded UK manufactured cone.
  • • 64 mm peak to peak maximum linear excursion.
  • • 24.5 Tm BL.
  • • Fast, accurate and controlled bass at high levels of excursion.
   
  ELECTRO ACOUSTIC SPECIFICATIONS     THIELE SMALL PARAMETERS
Nominal Chassis Diameter 18” / 457.2 mm   FS Hz 36 Hz
Impedance 8 Ω   RE Ohms 5.2 O
Power Handling 1200 w (A.E.S.)   Qms 13.610
Peak Power (6dB Crest Factor) 4800 w (A.E.S.)   Qes 0.420
Usable Frequency Range -6dB 28 Hz - 500 Hz   Qts0.400
Sensitivity (1 w - 1 m) 97 dB   Vas Ltr 1.56 litres
Vd litres 1.56 litres   CMS (mm/N) 0.09 mm/N
Minimum Impedance Zmin 7.44 Ω   BL T/m 24.5 T/m
Effective Piston Diameter 15.43” / 391.92 mm   Mms (grms) 209 grams
Peak Displacement Volume of Cone Vd 1.56 litres   Xmax (mm) 12.5 mm
Magnet Weight 4.7 Kg   Sd (cm2) 1210 cm2
Magnetic Gap Depth 0.47” / 12.00 mm   Efficiency % 2.0 %
Flux Density 1.1 Tesla   Le (1k Hz) 1.5 mH
Coil Winding Height 1.18” / 30.00 mm  
Voice Coil Diameter 4.0” / 101.6 mm  
   
  MOUNTING / SHIPPING INFORMATION     MATERIALS OF CONSTRUCTION
Overall Diameter 19.1” / 485.14 mm   Former Material Resin Bonded Glass Fibre
Width Across Flats 18” / 457.2 mm   Voice CoilCopper - Inside / Outside Windings
Flange Height 0.465” / 11.8 mm   Magnet MaterialFerrite
Baffle Hole Diameter F/M 16.53” / 419.86 mm   Chassis Die-cast Aluminium
Baffle Hole Diameter R/M 16.33” / 414.78 mm   ConeStraight Polycellulose Ribbed Cone
Gasket Supplied Front & Rear   Surround / Edge Termination Multi Roll Polyvinyl Damped Fabric
Fixing Holes 8x 7 mm on 468 mm PCD
8x 7 mm on 438.15 mm PCD
  Dust Dome Paper
Depth 8.66” / 220.00 mm   Connectors Push-button Spring Terminals
Weight 36.95 lb / 16.76 kg   Polarity Positive voltage at red terminal
causes forward motion of cone
Recommended Enclosure Volume 125 - 210 litres  
Shipping Weight 39.80 lb / 18.05 kg  
Packing Carton Dimensions 520 x 520 x 250 mm  
   

  • • Please enquire about alternative impedances.
  • • A.E.S. power handling test. Pink noise band-pass filtered at 12 dB per octave with cutoff frequencies of 30 Hz and 300 Hz. Driver mounted in free air, test signal applied at rated power for two hours.
  • • Please note that the frequency response measurements are supplied for comparison only and are not a measure of the low frequency performance which may be achieved in a fully optimized system.

Additional

Additional Information

Brands FANE

Tags

Product Tags

  • No tags connected to product

Use spaces to separate tags. Use single quotes (') for phrases.

Reviews

  1. Be the first to review this product

WRITE YOUR REVIEW

Write Your Own Review

You're reviewing: COLOSSUS 18XLS